Professional Noise Control Products Wide Web Spray Adhesive

Professional Noise Control Products Wide Web Spray Adhesive

Heavy Duty Wide Web Spray Adhesive 

This wide web spray adhesive is one of the highest performance aerosol adhesives available. For both temporary or permanent bonding, this high solids product is ideal for uneven or porous surfaces. Waterproof, flexible, transparent and non staining, use this product for your toughest adhesive applications, including noise control and pro audio applications made of foam, fabric, cotton, fiberglass, polypropylene, leather, cardboard, most plastics and many other materials. Not intended for use on vinyl. 

Formulated with the environment in mind, this product contains NO CHLORINATED SOLVENTS OR OZONE DEPLETERS. Cleans easily with Mineral Spirits.

Product Features:

• Wide Web Spray
• Temporary or Permanent Bond to Most Surfaces
• No Chlorinated Solvents
• No Ozone Depleters
• Waterproof, Flexible, Transparent and Non-staining
• Ideal for Uneven or Porous Surfaces or Weight Materials
• Use this product for your toughest adhesive applications 

MATERIAL: Professional spray adhesive.
FEATURES: Very aggressive.
SIZE: 12 oz.
APPLICATIONS: Foam, wood, cardboard, paper, metal, cloth, plastic, fabrics, canvas, carpet, foils, photos, felt, leather, rubber,cork, glass, films, fiberglass, tissue paper, collages, ceramics, balsa wood, styrofoam, displays, photocomposition, layouts, trims, jute pads, kick pads, latex foams, polyurethane foams, styrene board, drywall, particle board, laminate, insulation, polyethylene film, PVC drywall trim, HVAC duct liner.
FLAMMABILITY: Flammable
HMIS RATING: Health = 2, Flammability = 3, Reactivity = 0, Personal Protection = B 

DIRECTIONS:
Always shake well before using. Never aim valve at face. Hold can upright and apply adhesive in a side-to-side motion 10 to 14 inches from surface. TEMPORARY BONDS: Spray one surface, allow to tack and apply material to be bonded.
PERMANENT BONDS: Liberally spray both surface and material, allow to tack, then apply.
CLEANING SPRAY TIP: When finished with a particular spray application, always turn can upside down and spray for two seconds to clear valve and prevent clogging. If adhesive accumulates around nozzle, wipe clear while wet. If dried in valve opening, remove with degreasing solvent.

DANGER:
Contains Acetone and Hexane. Extremely Flammable. Use with adequate ventilation. Keep away from heat, sparks, open flame or other ignition sources. Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Contact a physician immediately. Vapor harmful. Avoid inhalation of spray mist or vapors. If overcome, move patient to fresh air. Call a physician immediately. Eye irritant. Avoid contact with eyes and skin. In case of eye contact, flush immediately with water and continue for 15 minutes. If irritation persists, see a physician. For skin contact, wash with soap and water. If irritation persists, call a physician immediately. Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120°F. KEEP OUT OF REACH OF CHILDREN. CAS NUMBERS: Isobutane/Propane Blend. 

Note: AGS-12 can only be shipped UPS GROUND