Shopping Cart (0)

Free Shipping on orders over 50$

Welcome to Talford Store!

Burn Barrier™ W Penetrating Wood Treatment

Availability: In stock


Quick Overview

Burn Barrier™ W Class A Penetrating Wood Treatment.
Fire Retardant Single Strength Ready To Use
(Do Not Dilute)

Burn Barrier™ W Penetrating Wood Treatment

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

BURN BARRIER™ W Class A Penetrating Wood Treatment
FIRE RETARDANT Single Strength Ready To Use

Flame-retards sawdust, wood, thatch and wood chips require undiluted BURN BARRIER™ W concentrate. BURN BARRIER™ W is also tested to be effective on natural foliage & unfinished wood products. ASTM E-84 Class A 125/SF/gallon of concentrate.

BURN BARRIER™ W is not as effective on plastic or synthetic fibers as it is on natural fibers or blends. BARRIER W™ will flame-retard all recommended items, but will not prevent charring. BURN BARRIER™ W is colorless, orderless and non-toxic, but is not recommended for ingestion. It will usually not affect the look, feel or ventilation qualities of any material treated. A test application on a small sample must be made prior to treatment if color, texture and appearance is critical. BURN BARRIER™ W will not normally lose effectiveness from age or from wearing off, but will lose effectiveness after rain if used outdoors. Materials treated may withstand drycleaning. BURN BARRIER™ W will usually not affect the shade or color fastness of textile, paper or dyes, normally not effected by water.
Testing for color-fastness should be done to confirm that the wood will maintain it’s color and
beauty after it is treated.

ASTM-E84 Tunnel Test Results:
  • Flame Spread – 25
  • Fuel Contribution – 0
  • Smoke Density – 85

Above tests are equivalent to UL723, ANSI No. 2.5, NFPA No. 255 and UBC No. 42-1.
Meets and Exceeds NFPA Test No. 701.

Do not dilute, as BURN BARRIER™ W ready-to-use must be applied in full strength to be effective. Shake or stir well before using. BURN BARRIER™ W may be applied by spraying or dipping. When spraying, make sure that material is thoroughly soaked. When dipping, thoroughly soak material and then string out or allow to dry by hanging. BURN BARRIER™ W may be applied in any room as it is virtually colorless, odorless and harmless, although adequate ventilation is recommended. One (1) gallon covers approximately 2 coats at 125 sf/gal.

Additional Information

Weight 8.0000
Weight Unit Kg